Úvod   Ostatní   Síťové speciality   Tinycontrol INA740

Kategorie produktů

TINYCONTROL INA740 digital power monitor (DIN version) for LK3 & LK4

hodnotit
372 CZK 307 CZK bez DPH
Běžná cena: 388 CZK

Unknown availability

Kód: NJSTNC0001 PN: INA740 Záruka: 26 months
Výrobce: TINYCONTROL
 (TINYCONTROL MARCIN NOSEK)
ul.Mazowieckiego 7G, RADOM 26-600, Polsko
sklep@tinycontrol.pl
www.sklep.tinycontrol.pl
Tinycontrol INA740 Precise digital power monitor with integrated current sensor and 16-bit delta-sigma ADC converter. INA740 is a dedicated sensor designed for accurate... více
Počet:
Přidat do košíku

Oblíbené
Porovnat
Tisknout
Poslat známému

Tinycontrol INA740

Precise digital power monitor with integrated current sensor and 16-bit delta-sigma ADC converter.

INA740 is a dedicated sensor designed for accurate measurement of electrical parameters in industrial and IoT applications. The device can measure bidirectional currents up to ±24 A (connector limit, the chip itself supports up to ±35 A) while supporting common-mode voltage up to 85 V. Thanks to its high accuracy and wide measurement range, it is ideal for monitoring energy consumption, system diagnostics, and performance optimization.

The sensor provides comprehensive measurements including current, bus voltage, chip temperature, power, and consumed energy. Communication is via the I2C bus and the RJ connector is compatible with tinycontrol devices, with the sensor supported by the LK4 controller.

  • Bidirectional current measurement in the range ±24 A with high accuracy
  • Voltage measurement range 0-85 V for a wide range of applications
  • Integrated temperature sensor with accuracy ±1.5 °C (at 25 °C)
  • 16-bit resolution for highly accurate measurements
  • Very low internal resistance (shunt) of just 800 µ? minimizes losses
  • Power measurement accuracy ±1.6% and energy accuracy ±2.1%
  • 4-position switch for changing the I2C address, allowing up to 4 sensors on one bus
  • Mounting on standard 35 mm DIN rail for easy installation

Universal connectivity and integration
The RJ connector of the sensor is compatible with tinycontrol devices, and the sensor is supported by the LK4 controller. For integration with other controllers (e.g., Arduino), you need to check the RJ connector pinout, which is described in the short LK4 manual.

Flexible I2C addressing
The sensor board is equipped with a 4-position switch that allows changing the I2C address. This makes it possible to operate up to 4 sensors on one I2C bus, a feature available with the LK4 controller.

Easy installation
The sensor supports mounting on a standard 35 mm DIN rail, making it easy to install in industrial distribution boards and control systems. The device is compatible with wires with a diameter of 0.5-2 mm (12-24 AWG) for flexible wiring.

BASIC SPECIFICATIONS

Current measurement range: ±24 A (bidirectional)
Voltage measurement range: 0-85 V
Internal resistance (shunt): 800 µ?
Current offset: ±62.5 mA (max.)
Power measurement accuracy: ±1.6% (max.)
Energy measurement accuracy: ±2.1% (max.)
Temperature sensor accuracy: ±1.5 °C (max. at 25 °C)
Measurement resolution: 16 bit
Supply voltage: 3.3 V
Conductor size: 12-24 AWG (diameter 0.5-2 mm)
DIN rail mounting: yes (35 mm)
Dimensions: 63 × 44 × 16 mm
Cable length: 27 cm

The sensor should be connected according to the diagram; for voltage measurement (and of course power and energy), the LK4 ground and the load ground must be common! In the case of an isolated system, only current measurement can be performed.

scheme
Brand
Type specification :  Network specialties
Manufacturer :  TINYCONTROL
Communication
Wi-Fi :  no
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Usage and purpose
Type of accessories :  digital power monitor
Physical properties
Color :  zelená
Dimensions :  63 × 44 × 16 mm
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Podobné produkty

Scroll