Product categories

TINYCONTROL SSR relay 1VD25A, 0-10V/250VAC, 25A, analog control

697 CZK 576 CZK without VAT

After order for 2 weeks

Code: NJSTNC0012 PN: SSR-1VD25A Warranty: 26 months
Výrobce: 
 (TINYCONTROL MARCIN NOSEK)
ul.Mazowieckiego 7G, RADOM 26-600, Polsko
sklep@tinycontrol.pl
www.sklep.tinycontrol.pl
Tinycontrol SSR-1VD25A Semiconductor SSR relay designed for smooth phase control of resistive loads. This modern SSR (Solid State Relay) represents a reliable alternative... more

Tinycontrol SSR-1VD25A

Semiconductor SSR relay designed for smooth phase control of resistive loads.

This modern SSR (Solid State Relay) represents a reliable alternative to mechanical contactors for controlling the power of electrical appliances. Thanks to phase control, it enables smooth increase and decrease of the power of the connected resistive load, which significantly extends the lifetime of appliances and improves ease of control.

The relay is controlled by analog DC voltage 0-10V, with the effective operating range approximately between 5-10V (determined by the switching circuit function and sine wave shape). The device is rated for a nominal current of 25A and voltage of 250V AC, covering most common applications.

  • Smooth power control using phase control for resistive loads
  • Analog control via DC voltage in the range of 0-10V with effective area 5-10V
  • High reliability thanks to absence of mechanical parts subject to wear
  • Nominal current 25A and voltage 250V AC for a wide range of applications
  • Single-pole design for switching one phase
  • Easy installation using a clip on a standard DIN rail
  • Supplied with heatsink for effective heat dissipation at higher loads

Advantages over mechanical contactors
SSR relay contains no moving parts that would be subject to mechanical wear. Therefore, it offers significantly higher reliability and longer service life than conventional mechanical contactors, especially in applications with frequent switching.

Applications of phase control
Phase control is ideal for regulating resistive loads such as heating elements, infrared heaters, lamps, or heating coils. It enables smooth power regulation without disturbing transients that occur during zero-cross switching.

Installation and cooling
The relay is equipped with a mounting clip for a standard DIN rail and comes with a heatsink that ensures effective dissipation of heat generated when switching higher currents. Proper heatsink installation is essential to ensure long-term reliability and full performance of the relay.

BASIC SPECIFICATION

Relay type: semiconductor (SSR) with phase control
Analog control: 0-10V DC (operating range 5-10V)
Nominal current: 25A
Nominal voltage: 250V AC
Number of switched poles: 1
Switching mode: phase control
Mounting: DIN rail clip and heatsink
Dimensions without heatsink: 30 × 60 × 46 mm
Dimensions with heatsink: 80 × 50 × 80 mm

Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili
Scroll