Product categories

Solarmi SK01 EU Smart Wi-Fi socket TASMOTA

352 CZK 291 CZK without VAT

After order for 3 days

Code: NJSGWL0061 PN: ATSPSK01 Warranty: 26 months
Výrobce: Xtend Solarmi
 (100MEGA Distribution s.r.o.)
Železná 7, 619 00 Brno, Česká Republika
info@100mega.cz
www.100mega.cz
Xtend Solarmi SK01 Tasmota EU Wall Socket Smart installation Wi-Fi socket with energy/power monitoring. It is designed to control electrical appliances (up to a maximum load of 16 A) remotely from anywhere via the internet... more
Xtend Solarmi SK01

Tasmota EU Wall Socket
Smart installation Wi-Fi socket with energy/power monitoring. It is designed to control electrical appliances (up to a maximum load of 16 A) remotely from anywhere via the internet.

HLW8032 consumption monitoring chipset build in, NO calibration needed.

The measurement error of active power about 0.2 %.
The measurement error of effective current is 0.5 %.
The measurement error of effective voltage is 0.5 %.

  • Pre Flashed TASMOTA EU Wall Socket Cosumption monitoring
  • The latest full version
  • Fully compatible with official Tasmota OTA server
  • Pre configed IOs plug and play
  • Pre flashed before assembling
  • Build in ESP8266 chip with 2M flash

Total local control with quick setup and updates. Control using MQTT, Web UI, HTTP or serial. Automate using timers, rules or scripts. Integration with home automation solutions. Incredibly expandable and flexible. Can be easily upgrade to ESPHome or Homekit etc. Upgradable firmware.

Specification:

Input voltage: 100-240 VAC (50/60 Hz)
Current: max. 16 A
Wireless standard: 802.11b/g/n, 2.4 GHz
Housing Color: White
Operation Temperature: -20 ~ +50 °C
Plastic material: ABS+PC
Fire-protection rating: 94-V0

Template:
{"NAME":"Athom Plug V2","GPIO":[0,0,0,3104,0,32,0,0,224,576,0,0,0,0],"FLAG":0,"BASE":18}

GPIOs:
GPIO# Component
GPIO0 None
GPIO1 None
GPIO2 None
GPIO3 CSE7766 Rx
GPIO4 None
GPIO5 Button1
GPIO9 None
GPIO10 None
GPIO12 Relay1
GPIO13 LedLinki
GPIO14 None
GPIO15 None
GPIO16 None
FLAG None

Notice:
HLW8032 occasionally report invalid power measurements for load values below 5 W. During this situation it sometimes reports a valid load. By setting SetOption39 to 128 (default) it must read at least 128 invalid power readings before reporting there is no load.
To discard all loads below 6W simply set SetOption39 1 (0 will reset to default on next restart) so it will report no load below 6 W.

Brand
Type specification :  Power Plug Switch
Manufacturer :  Xtend Solarmi
Technical specification
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -20
Network interfaces
Wi-Fi frequency :  2400 MHz
Standards :  802.11b/g/n
Power supply
Rated Voltage (V) :  100-240
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Depth (mm) :  47
Width (mm) :  78
Height (mm) :  78
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll