Product categories

XtendLan Surge protection for UTP cables, grounding conductor, 100/1000Mbit, protects two pairs

313 CZK 259 CZK without VAT
Common price: 408 CZK

After order for 2 weeks

Code: NETXTE6765 PN: SP11UTP3 Warranty: 26 months
Výrobce: XTENDLAN
 (100MEGA Distribution s.r.o.)
Železná 7, 619 00 Brno, Česká Republika
info@100mega.cz
www.100mega.cz
XtendLan UTP Cable Surge Protection Professional surge protection for UTP cabling with PoE and Gigabit Ethernet support. Surge protection designed to protect network equipment... more

XtendLan UTP Cable Surge Protection

Professional surge protection for UTP cabling with PoE and Gigabit Ethernet support.

Surge protection designed to protect network equipment from transient overvoltage conditions. Large one-time surge events, such as lightning strikes, can reach hundreds of thousands of volts and cause immediate or intermittent equipment failure. Lightning and power anomalies represent only 20% of voltage surges, with the remaining 80% caused internally. Although these surges are smaller, they occur more frequently and can damage sensitive electronic equipment over time.

The protection supports transmission speeds of 10/100/1000 Mbps including PoE (Power over Ethernet) and protects two wire pairs (1, 2 and 3, 6). The device is equipped with a grounding wire for safe discharge of overvoltage to ground. The compact aluminum housing measuring 85 × 25 × 25 mm and weighing 80 g allows for easy installation in any environment.

  • Multi-level surge protection with high discharge current capacity up to 2 kA (between conductors and PE).
  • Maximum discharge current of 0.3 kA for pairs 1, 2 and 3, 6 (measured at 8/20 µs).
  • Low clamping voltage <20 V and fast response time ≤1 ns ensure immediate protection.
  • Support for transmission speeds of 10/100/1000 Mbps and PoE with operating voltage up to 48 V.
  • Low insertion loss ≤0.5 dB and voltage standing wave ratio ≤1.2 for minimal signal impact.
  • Operating temperature from -20 to +55 °C, storage from -40 to +70 °C.
  • High reliability with MTBF >30,000 hours and certification according to IEC61643-21:2000 standard.

Protection and Reliability
The device offers multi-level protection with a wide range of discharge current. Maximum discharge current between conductors and protective earth (PE) reaches 2 kA, while individual pairs are protected by 0.3 kA current. The impulse clamping voltage is lower than 20 V, ensuring effective protection of connected equipment.

Installation and Construction
The compact aluminum housing with clear labeling allows for easy identification and installation. Grounding is implemented using an extension wire. The protection is suitable for installation in distribution panels, outdoor cabinets, or directly at the protected equipment.

BASIC SPECIFICATIONS

Port: 2× RJ-45
Response time: ≤1 ns
Rated operating voltage: 48 V
Max. voltage: 56 V
Lifetime (MTBF): >30,000 hours
Maximum discharge current (8/20 µs): 0.3 kA (pairs 1, 2 and 3, 6), 2 kA (between conductors and PE)
Impulse clamping voltage (10/700 µs): <20 V (pairs 1, 2 and 3, 6)
Insulation resistance: ≥0.4 MΩ
Insertion loss: ≤0.5 dB
Voltage standing wave ratio: ≤1.2
Transmission speed: 10/100/1000 Mbps
Operating temperature: -20 to +55 °C
Dimensions: 85 × 25 × 25 mm
Weight: 80 g

Brand
Type specification :  Overvoltage protection
Manufacturer :  XTENDLAN
Technical specification
Outdoor use :  no
Placement :  desktop
Typ vedení :  UTP kabel
Network interfaces
Number of PoE ports :  2
Port Speed :  1 Gb/s
Inputs and outputs
RJ-45 :  2
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Color :  black
Weight (g) :  80
Dimensions :  85 × 25 × 25 mm
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll