Product categories

Planet MGS-6311-8UP4X L3 switch, 8x2,5Gb PoE 802.3bt 240W, 4x10Gb SFP+

11 678 CZK 9 652 CZK without VAT
Common price: 12 117 CZK

After order for 3 weeks

Code: NETPLA2681 PN: MGS-6311-8UP4X Warranty: 38 months
Výrobce: PLANET Technology
 (Planet Technology)
11F, No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.)
sales@planet.com.tw
www.planet.com.tw
PLANET MGS-6311-8UP4X Professional Layer 3 managed multigigabit switch with advanced routing features and high PoE++ performance for demanding network infrastructures. The... more

PLANET MGS-6311-8UP4X

Professional Layer 3 managed multigigabit switch with advanced routing features and high PoE++ performance for demanding network infrastructures.

The MGS-6311-8UP4X switch represents a top-tier solution for modern enterprise networks that require high data throughput and power supply for high-performance end devices. It features 8 ports 10/100/1000/2500Base-T with PoE++ support (IEEE 802.3bt) up to 95 W per port and a total PoE budget of 240 W. For backbone network connectivity, there are 4 ports 10GBase-X SFP+ compatible with 1G/2.5G/10G modules.

As a full-featured Layer 3 switch, it supports dynamic routing protocols RIPv1/v2, OSPFv2/v3 for IPv4/IPv6 and VRRP for gateway redundancy. Switching capacity of 120 Gbps and throughput of 89.28 Mpps ensure seamless operation even at maximum load. Advanced redundancy using ITU-T G.8032 ERPS with recovery under 15 ms guarantees uninterrupted availability of critical applications.

Key Features
  • 8× multigigabit 2.5GBase-T ports with IEEE 802.3bt PoE++ up to 95 W per port and total budget of 240 W for powering Wi-Fi 7 APs, AI cameras, and IoT devices
  • 4× 10GBase-X SFP+ ports with 10G/2.5G/1G support for flexible uplink connectivity up to 120 km distance
  • Full-featured Layer 3 routing with RIPv1/v2, OSPFv2/v3, VRRP for gateway redundancy, and static routing for complex network topologies
  • Switching capacity of 120 Gbps (non-blocking) with 89.28 Mpps throughput and store-and-forward architecture for error-free operation
  • ITU-T G.8032 ERPS ring with recovery under 15 ms at 3 nodes, IEEE 802.1s MSTP, and redundant topologies for maximum availability
  • Advanced security with ACL (4K entries), IEEE 802.1x, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, and RADIUS/TACACS+ authentication
  • Complete IPv6 support including dual-stack management, IPv6 ACL, OSPFv3, RIPng, and hardware-based Layer 3 routing for future networks
  • 8 priority queues with WRR and strict priority, IEEE 802.1p/DSCP traffic classification for guaranteed QoS for VoIP and video applications
  • IGMPv1/v2/v3 snooping, MLDv1/v2, MVR, and multicast routing for efficient video stream and IPTV distribution
  • Intelligent PoE features with PD Alive Check automatic restart, PoE Schedule for energy saving, and per-port power management

Multigigabit connectivity for Wi-Fi 7 and broadband applications
2.5GBase-T ports eliminate the bottleneck of gigabit ports for modern wireless APs (802.11ax/be) with speeds of 1.2–3.6 Gbps. Thanks to PoE++ up to 95 W per port, it powers even the most demanding devices such as Wi-Fi 7 APs, 4K PTZ cameras, digital signage displays, or edge AI systems over existing CAT5e/6 cables at distances up to 100 meters.

Layer 3 routing and VLAN segmentation
Implementation of dynamic routing protocols RIP and OSPF enables automatic routing table creation and path optimization between VLAN segments. VRRP ensures default gateway redundancy with automatic failover when the master device fails. Supports up to 4K VLANs with 802.1Q tagging, Q-in-Q, protocol-based, MAC-based, and IP subnet VLAN for comprehensive network segmentation.

High availability and fast recovery
ITU-T G.8032 ERPS technology provides network recovery under 15 ms at 3 nodes (under 50 ms at 16 nodes) in ring topology. IEEE 802.1s MSTP enables spanning tree per VLAN. Supports major ring and sub-ring architecture for complex redundant topologies. Link aggregation IEEE 802.3ad LACP up to 64 trunk groups of 8 ports increases throughput and resilience.

Advanced security at all layers
Comprehensive ACL at layers 2–4 with up to 4K rules for filtering by MAC/IP addresses and TCP/UDP ports. IEEE 802.1x port-based and MAC-based authentication with RADIUS/TACACS+ integration. DHCP Snooping protects against rogue DHCP servers, IP Source Guard blocks IP spoofing, and Dynamic ARP Inspection prevents ARP poisoning attacks. Protection against DoS and TCP flood attacks.

Quality of Service for critical applications
8 priority queues on all ports with flexible WRR (Weighted Round Robin) and strict priority policy. Traffic classification according to IEEE 802.1p CoS, IPv4/IPv6 DSCP, and per-port settings guarantees low latency for VoIP, video conferencing, and real-time applications. TX/RX bandwidth control on each port for fair capacity sharing.

Multicast optimization
IGMPv1/v2/v3 snooping and MLDv1/v2 for IPv6 eliminate unnecessary multicast traffic flooding. Querier mode and Multicast VLAN Register (MVR) enable efficient IPTV stream and video surveillance data distribution across VLANs. Supports up to 1024 multicast groups with receiver/sender control and illegal source detection.

Flexible SFP+ uplink
4× 10GBase-X SFP+ ports with 10G/2.5G/1G support provide flexible backbone network connectivity. Compatible with 10GBase-SR/LR and 1000Base-SX/LX/BX modules for distances from 300 m to 120 km. SFP-DDM (Digital Diagnostic Monitor) enables real-time monitoring of optical power, temperature, bias current, and transceiver voltage.

Intelligent PoE management
PD Alive Check monitors the status of powered devices and automatically restarts non-responsive PDs by power cycling. PoE Schedule allows time-based scheduling of PoE on/off on individual ports for energy saving outside working hours. Per-port power limitation, port prioritization, and PD classification detection ensure optimal distribution of the 240W PoE budget.

Centralized management
Support for PLANET NMS and CloudNMS for centralized management and monitoring of all network devices including real-time PoE status. Web GUI, CLI via console/Telnet/SSH, SNMPv1/v2c/v3 with encrypted communication. Cisco-like commands minimize training time. ONVIF device discovery for automatic IP camera detection.

IPv6 ready infrastructure
Full IPv4/IPv6 dual-stack support including management, ACL, routing (OSPFv3, RIPng), DHCPv6, SNMPv6, SSHv6, and hardware-based IPv6 forwarding. Ready for IPv6 network transition without device replacement. IPv6 RA (Router Advertisement) and ICMPv6 for automatic configuration.

BASIC SPECIFICATIONS

Ports: 8× 10/100/1000/2500Base-T RJ-45 PoE++, 4× 10GBase-X SFP+ (compatible with 1G/2.5G)
PoE standard: IEEE 802.3bt/at/af, up to 95 W per port, total budget 240 W
Processor: MIPS 800 MHz
Memory: 4 GB RAM, 32 MB Flash
Switching capacity: 120 Gbps (non-blocking)
Throughput: 89.28 Mpps
MAC address table: 16K entries
VLAN: up to 4K VLAN groups, IEEE 802.1Q, Q-in-Q, protocol/MAC/IP-based
Layer 3 routing: RIPv1/v2, OSPFv2/v3, VRRP, BGP4/BGP6, static routing, 6K routing table
Spanning Tree: STP, RSTP, MSTP (IEEE 802.1D/w/s), ITU-T G.8032 ERPS
Link aggregation: IEEE 802.3ad LACP, up to 64 trunk groups of 8 ports
QoS: 8 priority queues, WRR, strict priority, IEEE 802.1p, DSCP
Multicast: IGMPv1/v2/v3 snooping, MLDv1/v2, MVR, up to 1024 groups
Security: IEEE 802.1x, ACL 4K entries, RADIUS, TACACS+, DHCP Snooping, ARP Inspection, IP Source Guard
Management: Web GUI, CLI (console/Telnet/SSH), SNMPv1/v2c/v3, PLANET NMS/CloudNMS
IPv6: dual-stack, OSPFv3, RIPng, IPv6 ACL, hardware-based routing
Jumbo frame: 12 KB
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: 10.4 W (system), 280 W (system + PoE max.)
Operating temperature: 0 to +50 °C
Dimensions: 330 × 230 × 43.6 mm (1U)
Weight: 2510 g


features

features

features

features

features

features

features

features

features
Brand
Type specification :  Switch
Manufacturer :  PLANET Technology
Technical specification
Fanless :  no
Homologation EN50155 :  no
Switching capacity (Gbps) :  120
Management :  yes
Standard :  802.3bt
Standard :  802.3at
Standard :  802.3af
PoE features :  PD alive
PoE features :  scheduler
PoE-in :  no
PoE-out :  802.3bt
PoE-out :  802.3af/at
PoE-out (quantity) :  8
Outdoor use :  no
Placement :  rack
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  0
Switch throughput (Mpps) :  89,28
Stackable :  no
OSI layer :  L3 dynamic
Display
Display :  no
Network interfaces
Gigabit LAN :  yes
LAN :  yes
Number of PoE ports :  8
Port Speed :  2,5 Gb/s + 10 Gb/s
Inputs and outputs
RJ-45 :  8
RJ-45 console/management :  1
RS-232 :  no
SFP+ :  4
Power supply
Power type :  build-in source
PoE support :  yes
Input Voltage (V) :  100 - 240 (AC)
Warranty
Warranty period EU (months) :  38
Warranty period CRN (months) :  38
Physical properties
Color :  blue
Weight (g) :  2510
Dimensions :  330 × 230 × 43,6 mm
Additional equipment and features
Certification mark :  FCC Part 15 Class A, CE
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll